Peerless Boilers
In cooperation with the U.S. Environmental Protection Agency and the Department of Energy, we are proud to offer residential oil boilers that meet or exceed efficiency standards for heating equipment. All Peerless Pinnacle Oil-fired boilers have earned the EnergyStar® symbol used to identify high-efficiency products. Installing boilers with the EnergyStar® rating is not only efficient and economical, but also environmentally friendly. All Peerless Pinnacle Oil boiler models have AFUE ratings of 90% or higher, significantly exceeding the federal energy standards for residential boiler efficiency.
Pinnacle Oil Boilers are equipped with a Beckett AFG Burner which helps the boiler to achieve its ultra-high efficiency rating.
The Peerless® Partner® indirect-fired water heater provides a true advancement in hot water generation. By utilizing the existing boiler as its heat source, the burner fires only when necessary and transfers heat energy through a highly efficient cupronickel, fin-tube heat exchanger. The heater functions as a separate heating zone and water movement is regulated from the boiler through the heater coil by a separate circulator or zone valve.
The modern coil design of the Peerless Partner indirect-fired water heater provides maximum heat transfer efficiency and resists mineral buildup that discolors water. Old style coils can produce discolored tapwater that affects taste and leaves blue bathtub rings. The heater’s cupronickel heat exchanger is highly resistant to any scaling deposits and is positioned so entering water provides scrubbing action, eliminating the need for chemical cleanings.
The domestic hot water is stored in a high-grade 316L stainless steel tank. Two inch foam insulation keeps the water hot with a standby loss of less than 1/2° F per hour. This allows the boiler to stay off most of the day and night. The result is more hot water with reduced boiler water temperatures and drastically reduced standby losses.
The Peerless Partner indirect-fired water heater has two or more times the recovery rate of gas-fired water heaters and supplies as much as five times the amount of hot water as a comparably sized electric water heater.
This heater is an ideal replacement for existing water heaters. It can also be used for new applications. A vent or stack is not required. The tank’s light weight makes it very easy to position. The plastic jacketing is maintenance free and does not scratch or rust.
The Peerless Partner indirect-fired water heater comes equipped with an adjustable, well-type Honeywell control and a T&P relief valve as standard equipment. See Additional Features
The Peerless Pinnacle Oil Boiler, The Peerless Pinnacle high efficiency Oil-fired condensing boiler offers 93%efficiency* and is EnergyStar® compliant. Two firing rates are available – .5 GPH and .6 GPH – with input ranges from 70,000 BTU/Hr. to 84,000 BTU/Hr. respectively. The residential boiler is equipped with a Beckett AFG Burner, enabling the boiler to reach efficiencies well in excess of conventional boilers; both firing rates qualify for the EnergyStar® rating. The heat exchanger is constructed of high alloy stainless steel that assures the boiler's durability and protects from corrosion. The direct vent, sealed combustion boiler offers many control features including multiple temperature set points for both heating and domestic hot water and outdoor reset capability. Test and diagnostic functions can be viewed on the LCD display. The boiler is certified for a zero clearance to combustibles and has a low vent outlet; both aid in ease of installation. Additional venting components are available for vertical or horizontal vent configurations. The slim space-saving design is enhanced by top mounting availability. A reversible swing door and top access to burner and internal components allows for quick and easy service and maintenance. An insulated acoustic shroud and boiler jacket promotes quiet operation and reduces heat loss. Optional equipment for the boiler include alarm relay as well as system and domestic hot water pump relays to support multiple applications. And, as with all Peerless products, a comprehensive warranty and the dependable Peerless name back the Pinnacle Oil boiler.
Hydronic heating is the key. Hydronic heating is the most practical, dependable, efficient and versatile method available for heating a home. Hydronic systems heat by convection and radiation without the need for fans or blowers. This method of heat transfer is gentle and cleaner than that of warm air furnaces and heat pumps, keeping your family warm, healthy and happy. Hard work and dedication by skilled employees have made us one of today’s top boiler manufacturers. From the beginning, our main priority has been to serve customers’ needs and to provide them with the best built boilers on the market. That commitment, still true today, is evident in all of our products and services. See Additional Features
Pinnacle Oil Boiler Features
• 93+% Efficient*, EnergyStar® Compliant
• Condensing, Oil-Fired Boiler
• Direct Vent, Sealed Combustion
• Two Firing Rates Available
• Multi-Functional Controls
• Quiet Operation
• Slim Design/Small Footprint
• Designed, Tested and Stamped in Accordance with the ASME Boiler and Pressure Vessel Code
* For low temperature applications Pinnacle Oil Boiler Optional Equipment
• Venting Kits (for Vertical or Horizontal Venting Options)
• Vent Accessories to Increase Vent Lengths
• Outdoor Reset Sensor
• Two Stage Multiple Boiler Operation
• Domestic Hot Water Circulator Relay
• Alarm Relays
• POC #2 (includes relay for DHW Circulator)
• POC #3 (includes ability to stage two boilers)
Pinnacle Oil Boiler Standard Equipment
• Beckett AFG Burner
• POC #1
• 30 PSI Safety Relief Valve
• ASME Rated Heat Exchanger
• LCD Function Display
• Multiple Temperature Operation
• Pressure/Temperature Gauge
• Pump Exerciser
• High Alloy Stainless Steel Heat Exchanger
• Pressure Relief Valve
• Fully Equipped for Outdoor Reset
• Operation with the Addition of an Outdoor Sensor
• Uses Commercial Standard #2 Oil with up to .2% Sulfur
Peerless Partner Indirect-fired water heater
* Five (5) Sizes
* Modern Coil Design
* Minimal Standby Temperature Loss
* Rapid Recovery Rate
* Long Lasting Stainless Steel Construction
* Easy Installation
* No Separate Chimney or Burner Needed
Return to Top
Email:HVAC@DanielsOil.com